kernel-Power Stable v52 in Extras-Devel

Kernel-power version v52 is now in Extras-Devel!
Update (from old version):
Use Hildon Application Manager or via apt-get. If you have Multiboot installed look bellow.
Installation:
From Hildon Application Manager install package: Linux kernel for power user
Or via apt-get package: kernel-power-flasher
Multiboot support (dropped):
Multiboot support for kernel-power was dropped because Multiboot damaging internal nand memory. If you are going to upgrade from kernel-power v51 to v52, first uninstall Multiboot and (optionally) switch to U-Boot. Then upgrade to kernel-power v52. Otherwise you can have problems and full reflash will be needed (due to Multiboot which damaging Maemo system).
Overclock support (optional):
From Hildon Application Manager install package: Linux kernel for power user (settings and overclock)
Or via apt-get package: kernel-power-settings
U-Boot support (optional):
From Hildon Application Manager install packages: U-Boot with kernel 2.6.28-omap1 and Linux kernel for power user (boot image for U-Boot)
Or via apt-get packages: u-boot-flasher and kernel-power-bootimg
Make sure you accept flashing U-Boot!
Packet injection wifi driver:
Kernel modules are already included and installed in /opt/packet-injection-modules/2.6.28.10-power52/
To load/unload it use shell script: http://atrey.karlin.mff.cuni.cz/~pal…t-injection.sh
BME replacement support:
This kernel has support for BME replacement (open source battery management). Will be announced…
New USB host mode:
This kernel has support for new usb host mode package USB Mode version 1.0-4. More info in this thread.
Uninstallation:
Overclock support or Bootimg package can be uninstalled via Hildon Application Manager or via apt-get. Uninstalling kernel itself is possible only via menu entry “Nokia Kernel“. NEVER UNINSTALL KERNEL POWER PACKAGES!!! IT CAN MAKE YOUR DEVICE UNBOOTABLE.
Changelog:
kernel-power (1:2.6.28-10power52) fremantle; urgency=low

Backport upstream patch: udf-use-hw-sector-size.diff (This fix UDF FS support on SD cards and USB disks)
Update bq2415x_charger patch: (use kstrtol, use dev_dbg, call sysfs_notify, rename N900 charger to bq24150a, fix reporting bad values, disable charging when charger disconnected, report errors)
Added patch kstrtol.diff which define macro kstrtol as strict_strtol
Update into about kernel-power-bootimg package
Package kernel-power-bootimg does not provide any features
Enable more netfilter and ipv6 modules
Added driver rx51_battery which export battery temperature, design capacity and voltage to sysfs, provides: kernel-feature-rx51-battery
Added patch tif_restore_sigmask-syscalls-arm.patch which fix pselect bug, added provides: kernel-feature-sigmask
Enable bridge module, provides kernel-feature-bridge
bq27x00_battery: Do not report nominal available capaciy if battery is not calibrated
Add sysfs entry hostdevice2 which show host device speed detected by musb_virthub.c
Optify bootimg package
Enable vlan (8021q) module
Fix reporting temperature in rx51_battery driver (driver should export temperature in 1/10 °C)
Add support for offline mode in bq2415x_charger driver